Looking for a stunning handmade dress that combines elegance with botanical charm? This sage green skater dress features beautiful cream fern leaf appliqués that transform a classic silhouette into something truly special. The fitted bodice flows into a flared A-line skirt that falls just above the knee, making it perfect for garden parties, special occasions, or any moment you want to feel beautifully put together.

The construction is straightforward once you understand the pieces. You will work flat panels for the bodice and skirt, then seam them together at the waist. Short sleeves add polish without overwhelming summer styling. The fern motifs are worked separately and sewn on at the end, so you can position them exactly where you want them.
This pattern comes in three sizes, from small through large, with finished bust measurements ranging from 82 cm to 100 cm. Whether you are making this dress for yourself or as a breathtaking gift, the detailed instructions guide you through every step from first chain to final leaf placement.
Pattern Overview and Skill Level
This dress pattern sits at an intermediate skill level. You should be comfortable with basic crochet stitches, shaping through increases and decreases, and seaming pieces together. The construction itself is not complicated, but the project requires patience and attention to detail because you are creating a fitted garment.
The bodice uses simple double crochet (dc) fabric with strategic shaping at the bust and armholes. The skirt panel gradually widens from waist to hem through edge increases on specific rows. Sleeves taper from cap to cuff using the double crochet two together (dc2tog) decrease.
The fern leaf motifs are small and work up quickly. They use a combination of single crochet (sc), half double crochet (hdc), and double crochet (dc) worked around both sides of a foundation chain. A second round adds a back loop only (BLO) border with decorative picots at the tip and sides.
Materials You Will Need
Gather everything before you start so you can work without interruption.
Yarn:
- Color A (Sage): Smooth DK weight cotton blend with good stitch definition. You will need approximately 925 yards (846 m) for size S, 1025 yards (937 m) for size M, or 1175 yards (1074 m) for size L. Purchase from one dye lot to ensure consistent color.
- Color B (Cream): Allow 165 yards (151 m) for the leaf pieces and sewing.
Hook:
- 4.0 mm (US G/6) or the size needed to achieve gauge
Notions:
- Stitch markers
- Tapestry needle
- Tape measure
- Rustproof pins
- Matching thread
- Small sew-on hook-and-eye closure
- 25 cm (10 in) lightweight nylon coil zipper for the left side seam
Gauge Information
Getting gauge right matters enormously for a fitted garment like this dress. Take the time to swatch before you begin.
Gauge: 18 stitches and 8 rows = 10 × 10 cm (4 × 4 in) in double crochet, after washing and drying flat.
To check your gauge, chain 28 and work 26 dc, then continue for at least 12 rows. Measure across the plain double crochet field inside the edges. Use the same yarn and hook you plan to use for the dress.
If you have too many stitches per 10 cm, go up a hook size. If you have too few, go down. After measuring, hang the dry swatch for 30 minutes and remeasure before choosing your skirt length. Cotton blends can grow vertically when hung.
The pattern provides specific stitch counts for shaping. Keep those counts exactly as written and simply add or subtract straight rows if you need to adjust the length.
Size Chart and Finished Measurements
Choose your size based on both your bust and waist measurements. The dress has minimal ease built in.
| Measurement | S | M | L |
|---|---|---|---|
| Body bust to fit | 78–80 cm | 87–89 cm | 96–98 cm |
| Finished bust | 82 cm | 91 cm | 100 cm |
| Finished waist | 73 cm | 82 cm | 91 cm |
| Finished hem | 113 cm | 122 cm | 131 cm |
The shoulder-to-hem length is approximately 80 cm (31.5 in) before trim. Check the skirt measurement against your hips, which typically fall about 18 to 22 cm below the waist. Baste the dress together and try it on before final seaming to ensure a good fit.
Abbreviations and Special Stitches
Here are all the abbreviations used in this pattern with their definitions:
- ch = chain
- dc = double crochet (yarn over, insert hook, pull up loop, yarn over and pull through 2 loops twice)
- hdc = half double crochet (yarn over, insert hook, pull up loop, yarn over and pull through all 3 loops)
- sc = single crochet (insert hook, pull up loop, yarn over and pull through both loops)
- sl st = slip stitch (insert hook, pull up loop directly through loop on hook)
- st(s) = stitch(es)
- sp = space
- RS = right side
- WS = wrong side
- dc2tog = double crochet two together (begin a dc in each of the next two stitches, keeping the final loop of each on the hook; yarn over and draw through all three loops)
- BLO = back loop only (work into the loop farther from you)
- Picot = ch 2, then sl st into the preceding sc (picots add no counted stitches)
- MR = magic ring (crochet the first round around an adjustable yarn loop)
Pattern Notes
Read these notes before starting:
- All size counts throughout the pattern appear as S / M / L.
- Work flat and turn each row.
- Chain 2 at the start of dc rows and chain 1 at the start of sc rows.
- Turning chains and slip joins never count as stitches.
- The first body row is the right side (RS).
- At row starts, work the first stitch in the first available stitch unless a shaping instruction says otherwise.
For evenly spaced increases: To work 8 evenly spaced increases, divide the old stitch count into eight consecutive groups, with group sizes differing by at most one. Work 2 dc in the last stitch of each group and 1 dc in the remaining stitches.
Construction Overview
The dress comes together in this order:
- Work the front bodice panel from waist to shoulders
- Work the back bodice panel from waist to shoulders
- Work the front skirt panel from waist to hem
- Work the back skirt panel from waist to hem
- Make two sleeves
- Make the fern leaf motifs
- Join shoulder seams
- Join side seams (leaving opening for zipper)
- Join waist seams
- Attach sleeves
- Install zipper and hook-and-eye closure
- Add edgings to neckline, hem, and cuffs
- Attach fern motifs
- Weave ends and block
Mark the right side and waist edge of each panel as you complete it. This will help you orient the pieces correctly during assembly.
Front and Back Bodice Instructions
Make two panels alike through Row 24. Use Color A.
Row 1: Ch 68 / 76 / 84. Dc in third ch from hook and across. (66 / 74 / 82 sts)
Rows 2, 4–5, 7–8, 10–11, and 13–14: Work straight in the established fabric.
Rows 3, 6, 9, and 12: Work 2 dc in first and last stitch. After these increase rows, you will have:
- After Row 3: 68 / 76 / 84 sts
- After Row 6: 70 / 78 / 86 sts
- After Row 9: 72 / 80 / 88 sts
- After Row 12: 74 / 82 / 90 sts
After Row 14, you should have 74 / 82 / 90 sts.
Row 15: With RS facing, join yarn in the fifth stitch. Work across, leaving the last four stitches unworked. Fasten the previous row end before joining. (66 / 74 / 82 sts)
Rows 16–24: Work straight at the new width in established fabric. (66 / 74 / 82 sts)
Front Shoulders
Row 25: Work the first 22 / 24 / 26 sts and leave the rest unworked. With RS facing, rejoin for the second shoulder and work the last 22 / 24 / 26 sts. Leave the center 22 / 26 / 30 sts open for the neckline.
Work each shoulder independently. Keep the armhole edge straight. At the neck edge, leave the necessary stitches unworked at the end of an inward row, or sl st over those stitches before the turning chain at the start of an outward row.
Stitch counts per row for each front shoulder:
| Row | S | M | L |
|---|---|---|---|
| Row 26 | 19 | 21 | 23 |
| Row 27 | 17 | 19 | 21 |
| Row 28 | 16 | 18 | 20 |
| Row 29 | 16 | 18 | 20 |
| Row 30 | 16 | 18 | 20 |
Fasten off each shoulder after Row 30.
Back Shoulders and Keyhole
Rows 25–28: Work each half separately over 33 / 37 / 41 sts per row. At Row 25, rejoin at the center for the second half. Leave the center edges unjoined to form the keyhole opening.
Rows 29–30: With RS facing, rejoin at the first of the outermost 16 / 18 / 20 sts of each half and work only that width for two rows. Leave the inner stitches unworked. Fasten off. (16 / 18 / 20 sts per shoulder)
Tip: At the end of an armhole or neck shaping row, place a marker in the last worked stitch. Use these markers to line up the seams during assembly.
Front and Back Skirt Instructions
Make two panels. Mark the RS and the top edge before beginning the second panel. Use Color A.
Row 1: Ch 68 / 76 / 84. Dc in third ch from hook and across. (66 / 74 / 82 sts)
Increase rows: 3, 5, 6, 8, 10, 12, 13, 15, 17, 18, 20, 22, 23, 25, 27, 29, 30, and 32. On each of these rows, work 2 dc in the first and last stitch and keep the middle in pattern. Each listed row adds 2 sts.
All other rows through Row 34: Work even in pattern.
After Row 34, you should have 102 / 110 / 118 sts. Each skirt panel should measure about 42 cm (16.5 in) from waist to hem.
Sleeve Instructions
Make two sleeves. The first row forms the sleeve top. Work toward the cuff and keep the center of the top edge marked for the shoulder seam.
Row 1: Ch 76 / 84 / 92. Dc in third ch from hook and across. (74 / 82 / 90 sts)
Decrease rows: 2, 4, 6, 9, and 11. Work dc2tog over the first two sts, work straight to last two sts, dc2tog. This removes 2 sts per listed row.
Remaining rows through Row 11: Dc across.
Final cuff count: 64 / 72 / 80 sts
The goal sleeve length is 14 cm (5.5 in). Pin the sleeve top into the basted armhole before attaching. Match the marked center to the shoulder seam. Adjust the sleeve foundation chain if your fabric needs more ease.
Fern Motif Instructions
Use Color B and leave a 30 cm (12 in) tail on each completed motif for sewing later.
The fern sprigs are made from individual leaf blades attached to a chain stem. Each blade is worked around both sides of a foundation chain.
Short Blade
Round 1: Ch 11. Starting in the second ch from hook, work: sc, 2 hdc, 3 dc, hdc, 2 sc. Work 3 sc in the final ch (this is the tip). Reverse the sequence down the underside of the chain, then join. (21 sts)
Round 2: Sc in BLO around. Work a picot after the middle stitch of the 3-sc tip and halfway down each side. Join. (21 sc plus 3 picots)
Long Blade
Round 1: Ch 15. Starting in the second ch from hook, work: sc, 2 hdc, 6 dc, 2 hdc, 2 sc. Work 3 sc in the final ch (this is the tip). Reverse the sequence down the underside of the chain, then join. (29 sts)
Round 2: Sc in BLO around. Work a picot after the middle stitch of the 3-sc tip and halfway down each side. Join. (29 sc plus 3 picots)
Quantities Needed
| Placement | Per motif | Quantity |
|---|---|---|
| Bodice front | 1 long + 6 short | 2 |
| Skirt front | 1 long + 4 short | 5 |
| Sleeves/armholes | — | 0 |
Assembling the Sprigs
For sprigs, chain 12 and slip stitch back along 11 chains to create a stem. Set blade bases in alternating pairs along the stem and tack with the yarn tails. For fan-shaped clusters, spread blades at measured angles from the same base. For three hearts or fans, stagger their bases and overlap their edges slightly.
Assembly Instructions
Shoulder Seams
With RS together, whipstitch each front shoulder to the corresponding back shoulder. You will join 16 / 18 / 20 pairs on each side.
Side Seams
On the right side of the dress, seam all 34 skirt row pairs and 14 bodice row pairs.
On the left side, leave the first 9 skirt rows and first 10 bodice rows from the waist open for the zipper. This means you will seam 25 skirt row pairs and 4 bodice row pairs on the left.
Waist Seam
Join the skirt and bodice waist edges with RS together. At the zipper opening, secure the seam ends separately. You will join 132 / 148 / 164 waist pairs.
Sleeve Seams
Close each sleeve side seam from its cuff to its top. Each sleeve has 11 row pairs.
Sleeve Attachment
Match each sleeve seam to the underarm and the marked top center to the shoulder. Distribute the stitches around the armhole opening. Each sleeve has 74 / 82 / 90 positions to match around the armhole.
Checkpoint
Before continuing, verify that waist stitches match one for one, side seams are even, and the neckline opens at center back. Try the dress on over your intended underlayer.
Side Zipper Installation
Align the zipper teeth between the two open edges on the left side. Match the waist seam on both sides. Tip the zipper tape toward the WS and baste it in position with 2 lines of basting.
Backstitch the tape to each edge without catching the teeth. Anchor the tape ends, remove basting, and close the zipper.
Checkpoint: The zipper runs smoothly and the waist seam aligns across both sides. If your closed zipper length differs from the opening, adjust the end of the left skirt seam before sewing permanently.
Edgings
Neckline and Back Opening
Using Color A, start at the upper edge of one side of the back opening.
Row 1: Sc evenly along the back neck, across both shoulder joins, and around the front neck to the opposite side of the opening. (84 / 92 / 100 sc)
Row 2: Turn. Sl st loosely in each sc. (Same count as Row 1)
Closure: Sew one hook and one eye opposite each other at the top of the back opening.
Checkpoint: Opening edges meet without overlapping and the neck lies flat. Adjust the pickup density evenly before fastening off if needed.
Hem Edging
Using Color A, join at a side seam.
Round 1: Work one sc per hem stitch and join. (204 / 220 / 236 sc)
Round 2: Sl st loosely in each sc and join. (204 / 220 / 236 sl sts)
Cuff Edging
Cuff Round: Work one sc per cuff stitch and join. (64 / 72 / 80 sc per cuff)
Checkpoint: Edging lies flat without a drawstring effect. If it curls or cups, redo it with a slightly larger hook.
Leaf Placement
Using the yarn tails from each motif and your tapestry needle, position the fern sprigs on the dress.
Mirror the bodice sprigs at the neckline, placing one at either shoulder. Spread five upright sprigs around the skirt toward its hem.
Pin all 7 motifs first before sewing anything permanently. Sew around each base, then tack down the outer ends and any points that lift.
Checkpoint: Walk and raise your arms during a fitting. Motif edges should stay flat and the sleeves and hem should hang evenly.
Finishing
Weave every tail back and forth through matching stitches. Tuck hook-and-eye sewing ends on the WS.
Wash or wet-block as directed on the yarn label. Roll in a towel, ease to the published measurements, and dry completely flat.
Final checkpoint: Measure bust, waist, hem, and shoulder-to-hem length. Confirm both sleeves or armhole edges are even. Make any seam adjustments after drying.
Care Instructions
Follow the yarn label for washing. For washable cotton blends, wash gently in cool water and dry flat. Store the dress folded to help keep the skirt from growing over time.
Keep detachable hardware away from young children and pets. Inspect the closure and motif tacks before each wear to catch any loose stitches early.

Tips for Success
Try it on early and often. Baste the pieces together before final seaming so you can check the fit. This is especially important around the bust and waist.
Block your swatch and your pieces. Cotton blend yarns behave differently once wet. Blocking before assembly gives you accurate measurements and ensures your seams line up.
Take your time with the leaves. The fern motifs are the signature detail of this dress. Work them carefully and block them flat before attaching.
Mark everything. Use stitch markers generously to identify right sides, waist edges, shoulder positions, and shaping rows. It makes assembly much smoother.
This dress is a labor of love, but the result is a one-of-a-kind garment you can wear with pride. The sage and cream color combination evokes springtime meadows, and the classic skater silhouette flatters many body types. Whether you wear it to a garden party, a special brunch, or just because you want to feel beautiful on a Tuesday, this dress delivers.
Thank you so much for choosing this pattern! If you make the Sage Fern Skater Dress, I would love to see your version. Share your photos on Instagram or in our Facebook group, and tag your project so others can admire your work too.
If this pattern caught your eye, go ahead and save it to your Pinterest boards so you can find it when you are ready to start. And if you do make it, please come back and leave a comment below. I always love hearing how projects turn out!
You Might Also Like
- Sunset Ombre Granny Tote Free Crochet Pattern
- Blue Ocean Shell Dress Crochet Pattern
- Lavender Lace Party Dress Free Crochet Pattern
- Pastel Garden Granny Square Tote Free Crochet Pattern