Home ยป Forest Check Shirt Dress Crochet Pattern

Forest Check Shirt Dress Crochet Pattern

A forest green crochet dress with a folded shirt collar, balloon sleeves, and an A-line skirt. That’s what you’re making here.

Handmade forest green crochet dress featuring A-line skirt, ribbed cuffs, and matching crocheted belt at waist

This pattern uses basketweave stitch throughout, which creates that gorgeous woven texture you see in the photos. The construction is straightforward: you’ll work the yoke from the neck down, separate the sleeves, shape the bodice, then add the skirt and finishing details.

The finished dress fits a bust of 84-88 cm with positive ease, giving you a comfortable, flattering fit. If you can work front post and back post double crochets, you have all the skills you need.

Why This Design Works

The basketweave texture does something special here. It creates visual interest without complicated colorwork, and the raised blocks catch light in a way that makes the forest green yarn really shine. The texture also adds body to the fabric, which helps the A-line skirt hold its shape beautifully.

The balloon sleeves gathered into ribbed cuffs give this dress a modern, editorial feel. Combined with the classic shirt collar and button placket, you get a piece that looks far more complex than it actually is to construct.

This is a statement garment. The kind of dress that gets compliments and questions about where you bought it.

Skill Level

Intermediate. You should be comfortable with:

  • Working in rows and rounds
  • Front post double crochet (FPdc) and back post double crochet (BPdc)
  • Basic increases and decreases
  • Reading a pattern with multiple sections

If you’ve never done post stitches before, practice on a small swatch first. They’re not difficult once you understand the concept.

Materials You’ll Need

Yarn:

  • Forest green DK weight (category 3) cotton blend: 1350 g, approximately 3375 m
  • Look for yarn with about 250 m per 100 g

The pattern recommends buying an extra 15-20% if you plan to alter the length or if your gauge swatch turns out denser than expected. Cotton blend works best here because it has enough drape for the skirt while holding the basketweave texture well.

Hooks:

  • Main hook: 4.0 mm (or size needed for gauge)
  • Edging hook: 3.5 mm (or size needed for gauge)

Notions:

  • Tapestry needle
  • Scissors
  • Measuring tape
  • 12 locking stitch markers
  • Blocking mat and pins
  • Matching strong sewing thread and needle
  • 4 buttons, 15 mm diameter, in cream

A note about slips: The pattern recommends wearing an opaque slip underneath if your swatch shows gaps. This is common with cotton yarn and post stitches, so don’t worry if your fabric isn’t completely opaque.

Finished Measurements

MeasurementSample Size
Bust92 cm
Waist80 cm
Neck to waist44 cm
Waist to hem70 cm + edging
Upper sleeve37 cm
Wrist18 cm

This is one measured sample size, not a graded size range. Compare your measurements to these before starting, especially the waist. The finished waist is 80 cm.

Gauge

Blocked main fabric: 20 stitch positions and 12 rows/rounds = 10 x 10 cm with the main hook.

A chain space position counts as one position in the mesh yoke sections. Measure ribbing relaxed, not pulled sideways.

How to make a gauge swatch:

Chain 35. Work a double crochet (dc) in the third chain from hook and in each chain across. You should have 33 dc.

Work 20 more rows in the bodice stitch, using chain 2 to turn each row. Wash your swatch and dry it flat. Measure the central 10 cm, staying away from the edges.

If your gauge is off, change your hook size and try again. Keep adjusting until both your stitch gauge and row gauge are close to the pattern gauge.

Abbreviations and Special Stitches

Basic abbreviations:

  • ch = chain
  • sl st = slip stitch
  • sc = single crochet
  • hdc = half double crochet
  • dc = double crochet (yarn over, insert hook, pull up loop, yarn over and pull through 2 loops twice)
  • st(s) = stitch(es)
  • sp(s) = space(s)
  • RS = right side
  • WS = wrong side
  • rnd = round
  • rep = repeat
  • inc = increase
  • dec = decrease
  • BLO = back loop only

Front Post Double Crochet (FPdc):

Yarn over. Insert your hook around the post of the stitch from the front (right to left, then back to the right). Pull up a loop. Finish as a regular dc. Important: do not also work into the top loops of that same stitch.

Back Post Double Crochet (BPdc):

Same as FPdc, but insert your hook from the back (left to right, then back to the left). This pushes the stitch toward the front of the work.

dc2tog (double crochet 2 together):

Work a partial dc in the next stitch, leaving the last loop on your hook. Work another partial dc in the following stitch, leaving that last loop on your hook too. Yarn over and draw through all 3 loops on your hook. This consumes 2 stitches and produces 1 stitch.

sc2tog:

Same principle as dc2tog, but without the initial yarn overs.

Basketweave Stitch:

Blocks are 4 posts wide and 4 rows tall. On RS rows or unturned rounds, work FPdc across the first block and BPdc across the next block. Alternate across. On WS rows, reverse your FPdc and BPdc so the same face remains raised. After every 4 rows (the block height), swap which blocks are raised. Work incomplete edge blocks only over the available stitches.

Picot: Chain 3, slip stitch into the first of these 3 chains.

Shell: 5 dc into the same specified stitch or space.

Written repeats in square brackets are worked exactly the stated number of times.

Pattern Notes

Read these before you start. They’ll save you confusion later.

  • Chain 2 at the start of a dc row does not count as a stitch. Work into the first stitch.
  • Chain 1 at the start of a sc row does not count as a stitch.
  • Joined rounds end with a slip stitch in the first actual stitch. Never count the join.
  • Do not turn joined rounds unless the pattern tells you to.
  • Mark the first stitch of each round and move your marker as you go.

About the yoke corners:

Four ch-2 corner spaces separate the yoke segments. Corner chains are excluded from dc position totals. An increase corner is worked as [dc, ch 2, dc] into the corner space. The two new dc belong to the adjacent segments, adding 8 positions across all four corners per round.

After the underarm split:

There are no more corner spaces. Count underarm foundation chains as stitches on the next round. Work shaping stitches as ordinary dc, then resume the established texture. At each increase round, distribute the additions in plain columns. Do not double-work a rib post.

Construction Overview

You’ll work this dress in the following order:

  1. Neck foundation
  2. Shaped yoke
  3. Underarm split
  4. Fitted bodice
  5. Flared skirt
  6. Sleeves
  7. Collar, neck edge, and button bands
  8. Assembly and blocking

Try on the dress over a slip after the underarm split and again at the waist. This helps you catch fit issues before you’ve committed to the skirt.

Instructions

Yoke

Begin flat at center front. The yoke remains open until the underarm split.

Foundation: Ch 86. Place a marker in each corner space location.

Row 1 (RS): Dc in third ch and next 14 ch (15 dc total); ch 2; dc 12; ch 2; dc 30; ch 2; dc 12; ch 2; dc 15. Turn. (84 dc; 4 corner spaces)

Rows 2-28: Work basketweave across each segment. Work an increase corner into each corner space. Ch 2 and turn after every row.

Here are the stitch counts for each row:

  • Row 2: 92 positions; 4 corner spaces
  • Row 3: 100 positions; 4 corner spaces
  • Row 4: 108 positions; 4 corner spaces
  • Row 5: 116 positions; 4 corner spaces
  • Row 6: 124 positions; 4 corner spaces
  • Row 7: 132 positions; 4 corner spaces
  • Row 8: 140 positions; 4 corner spaces
  • Row 9: 148 positions; 4 corner spaces
  • Row 10: 156 positions; 4 corner spaces
  • Row 11: 164 positions; 4 corner spaces
  • Row 12: 172 positions; 4 corner spaces
  • Row 13: 180 positions; 4 corner spaces
  • Row 14: 188 positions; 4 corner spaces
  • Row 15: 196 positions; 4 corner spaces
  • Row 16: 204 positions; 4 corner spaces
  • Row 17: 212 positions; 4 corner spaces
  • Row 18: 220 positions; 4 corner spaces
  • Row 19: 228 positions; 4 corner spaces
  • Row 20: 236 positions; 4 corner spaces
  • Row 21: 244 positions; 4 corner spaces
  • Row 22: 252 positions; 4 corner spaces
  • Row 23: 260 positions; 4 corner spaces
  • Row 24: 268 positions; 4 corner spaces
  • Row 25: 276 positions; 4 corner spaces
  • Row 26: 284 positions; 4 corner spaces
  • Row 27: 292 positions; 4 corner spaces
  • Row 28: 300 positions; 4 corner spaces

Checkpoint: You should have two edge half-panels of 42 positions each, one center panel of 84 positions, and two sleeves of 66 positions each. Total: 300 positions. Depth should be approximately 23.3 cm.

Underarm Split and Bodice

Work the first 42-position half-panel, ch 8, skip 66 sleeve positions, work the center 84-position panel, ch 8, skip 66 sleeve positions, work the final 42-position half-panel. Join to the first stitch. Leave the four corner spaces unworked. (184 body positions; 66 held positions per sleeve)

The join closes the bottom of the front placket. Keep both opening edges separate above it for the button bands. Continue basketweave in unturned rounds.

The split row is not counted as Bodice Round 1. Work over the chains on Round 1. Mark 8 equally spaced points, about 23 stitches apart. Move these markers to keep your decreases evenly distributed.

Bodice Rounds 1-5: Work established bodice texture in every position. (184 sts)

Bodice Round 6: [21 stitches in texture, dc2tog] 8 times. (176 sts)

Bodice Rounds 7-11: Work established bodice texture in every position. (176 sts)

Bodice Round 12: [20 stitches in texture, dc2tog] 8 times. (168 sts)

Bodice Rounds 13-17: Work established bodice texture in every position. (168 sts)

Bodice Round 18: [19 stitches in texture, dc2tog] 8 times. (160 sts)

Bodice Rounds 19-25: Work established bodice texture in every position. (160 sts)

Checkpoint: 160 stitches = 80 cm waist. Neck-to-waist length should be about 44 cm, before any added collar. If the fit is wrong, correct it here before adding the skirt.

Skirt

Skirt Round 1: [Dc in next 3 sts, 2 dc in next st] 40 times; join. (200 sts)

On ordinary skirt rounds, work the established rib or basketweave texture. On each numbered increase round below, divide the old count into the blocks specified. Work each block in texture with 2 dc in its last stitch. Each increase round adds 16 stitches. Re-establish the texture over the new positions on the next round.

Skirt Round 8: [12 sts in texture, 2 dc in next st] 8 times; then [11 sts in texture, 2 dc in next st] 8 times. (216 sts)

Skirt Round 16: [13 sts in texture, 2 dc in next st] 8 times; then [12 sts in texture, 2 dc in next st] 8 times. (232 sts)

Skirt Round 24: [14 sts in texture, 2 dc in next st] 8 times; then [13 sts in texture, 2 dc in next st] 8 times. (248 sts)

Skirt Round 32: [15 sts in texture, 2 dc in next st] 8 times; then [14 sts in texture, 2 dc in next st] 8 times. (264 sts)

Skirt Round 40: [16 sts in texture, 2 dc in next st] 8 times; then [15 sts in texture, 2 dc in next st] 8 times. (280 sts)

Skirt Round 48: [17 sts in texture, 2 dc in next st] 8 times; then [16 sts in texture, 2 dc in next st] 8 times. (296 sts)

Skirt Round 56: [18 sts in texture, 2 dc in next st] 8 times; then [17 sts in texture, 2 dc in next st] 8 times. (312 sts)

Skirt Round 64: [19 sts in texture, 2 dc in next st] 8 times; then [18 sts in texture, 2 dc in next st] 8 times. (328 sts)

Skirt Round 72: [20 sts in texture, 2 dc in next st] 8 times; then [19 sts in texture, 2 dc in next st] 8 times. (344 sts)

Skirt Round 80: [21 sts in texture, 2 dc in next st] 8 times; then [20 sts in texture, 2 dc in next st] 8 times. (360 sts)

All unlisted skirt rounds: Work one textured stitch in each stitch, without increases. The stitch count stays at the most recent stated total.

Final Skirt Round 84: Work texture as scheduled, including an increase if this is an increase round. (360 sts)

Skirt checkpoint: 70 cm waist-to-hem before edging. The planned neck-to-hem length is approximately 114 cm, plus 1-3 cm for edging. Hold the garment upright for a few minutes to check cotton stretch before committing to the hem.

Sleeves (Make Two)

Sleeve Round 1: Join at underarm; 8 dc across underarm chains, then 66 sts in texture across held sleeve sts; join. (74 sts)

Sleeve Round 2: [Work 35 sts in texture, dc2tog] twice; join. (72 sts)

Sleeve Rounds 3-54: Work basketweave evenly; join each round. (72 sts per round)

Cuff Round 1: Sc2tog 36 times; join. (36 sts)

Cuff Round 2: Dc in each st; join. (36 sts)

Cuff Rounds 3-6: Alternate FPdc, BPdc around; join each round. (36 sts per round)

Checkpoint: Cuff circumference should be about 18 cm. If your wrist cannot pass through, undo the cuff and use 40 or 44 stitches instead, keeping an even rib count.

Assembly

Close any small holes at the underarm corners with a short duplicate-stitch pass through adjacent stitch legs. Do not tighten the opening.

Secure the bottom of the placket with 3 small sewn reinforcing stitches across the join. Keep the opening above it separate.

Lay the garment flat and compare sleeve seams, waist, and hem. Remove temporary construction markers after checking.

Checkpoint: The garment should hang level. The underarms should contain no gaps. The neck and front opening should remain usable. Check bust and waist circumference again. Never force a too-small neck opening over the head.

Edgings and Details

Button Band

Row 1: With RS facing, work 42 sc evenly up the first front-opening edge, about 3 sc per 2 dc row ends. Turn. (42 sc)

Row 2: Ch 1; sc across. Turn. (42 sc)

Row 3: Ch 1; sc across; fasten off. (42 sc)

Buttonhole Band

Row 1: Work 42 sc up the opposite opening edge. Turn. (42 sc)

Row 2: Ch 1; sc 4, ch 2, skip 2; sc 8, ch 2, skip 2; sc 8, ch 2, skip 2; sc 8, ch 2, skip 2; sc 6. Turn. (42 positions; 4 buttonholes)

Row 3: Sc in each sc and work 2 sc in each ch-2 space; fasten off. (42 sc)

Collar

Row 1: Leaving the button bands unworked, pick up 80 sc evenly around the neck foundation, excluding corner chains. Turn. (80 sc)

Row 2: Ch 2; dc in every st. Turn. (80 dc)

Rows 3-8: Ch 2; 2 dc in first st, dc across to last st, 2 dc in last st. Turn. (82, 84, 86, 88, 90, 92 dc respectively)

Collar Edge: Sc around the two short ends and outer collar edge, placing 3 sc at each outer corner; fasten off. (92 outer-edge sc plus measured end pickups)

Fold the collar outward. Tack each point lightly to the first collar row if it curls. Sew buttons opposite the holes using doubled thread and four passes through each button. Secure on the WS.

Belt

Row 1: Ch 7; sc in second ch and across. Turn. (6 sc)

Row 2: Ch 1; sc BLO across. Turn. (6 sc)

Following Rows: Repeat Row 2 until belt measures 140 cm; fasten off. (6 sc per row; about 280 rows at 20 sc rows per 10 cm)

Hem

Hem Round: Sc evenly in each final skirt st; join and fasten off. (Same stitch count as final skirt round)

Checkpoint: Edges should lie flat without rippling. Buttons should pass through their holes easily.

Finishing

Weave every yarn end through the WS of at least 6 stitches. Reverse direction twice. Trim only after washing.

Soak briefly in cool water with gentle detergent. Squeeze in a towel without twisting. Lay flat and pin the waist and skirt to the planned measurements.

Let dry completely. Remove pins and measure again. Support the heavy skirt when lifting. Do not hang wet cotton.

Final checkpoint: Bust approximately 92 cm, waist 80 cm, skirt length 70 cm before edging. Sleeve lengths should match within 0.5 cm. Record any difference and your actual yarn use before making another size.

Care Instructions

Follow your yarn label for specific care instructions. Generally, hand wash cool, support the weight when wet, reshape, and dry flat. Do not wring or tumble dry unless your yarn permits it. Test strong colors for bleeding before combining them with pale yarn.

Safety Notes

This adult garment is not a toy or a children’s pattern. Buttons are small parts. Check their stitching before each wear and keep them away from babies and young children. Long belts and ties can catch on things, so secure them during wear.

Close-up of basketweave stitch texture on forest green crochet dress showing raised woven pattern detail

Tips for Success

On the basketweave texture: Keep your tension consistent. Post stitches can tighten up your work, so check your gauge frequently in the first few rounds.

On the yoke: Count your stitches after every few rows. It’s much easier to fix a mistake in row 5 than to discover it in row 25.

On the skirt: The cotton will stretch when you hold it up. This is normal. That’s why the pattern suggests holding the garment upright before finishing the hem.

On fitting: Try this dress on over a slip at the checkpoints. A few minutes of trying on can save hours of frogging.

This dress is a commitment, but the result is stunning. The basketweave texture, the elegant silhouette, the professional details like the collar and button placket. When you finish this, you’ll have a garment that looks like it came from a high-end boutique.

Thank you so much for choosing this pattern. If you make this forest check shirt dress, I would absolutely love to see it. Share your photos on Instagram or Facebook and tag us. Seeing your creations is genuinely the best part.

Save this pattern to your Pinterest boards so you can find it when you’re ready to cast on. And if you make it, drop a comment below. I’d love to hear how it turns out for you!

You Might Also Like

Leave a Comment

Your email address will not be published. Required fields are marked *

*